The YD-R238FS is a dual-lane full-height turnstile gate engineered for high-throughput perimeter security. Its integrated dual-passage design allows two independent lanes within a single cabinet, effectively doubling access capacity while reducing installation footprint. Driven by a brushless motor or solenoid core, the system supports configurable rotor options to match different security requirements. Equipped with RS485 and dry contact interfaces, onboard industrial control logic, and fail-safe disengagement during power failures, the YD-R238FS delivers reliable access control for transit terminals, industrial sites, and commercial perimeters.

Core Features & Technical Advantages

Integrated Dual-Lane Space-Saving Housing

By combining two parallel passage corridors into a single 2400×1500×2200mm SUS304 stainless steel enclosure, the YD-R238FS effectively doubles access capacity compared to single-lane units while reducing overall installation footprint, conduit wiring, and mounting hardware costs.

90° vs. 120° Rotor Mechanics

The system supports two distinct revolving barrier options:

90° Configuration (4-Arm Rotor): Divides the revolving space into four quadrants, maximizing physical anti-tailgating control and physical separation per pass.

120° Configuration (3-Arm Rotor): Divides the revolving space into three quadrants, offering wider physical clearance per person for increased walking comfort.

Brushless Drive & Shock-Absorbing Core

Engineered with a brushless drive system and a secondary mechanical shock-absorbing framework, the rotor movement operates smoothly without mechanical recoil. The internal mechanical brake locks against reverse intrusion or forced arm movement, protecting transmission gears from impact wear.

Fail-Safe Evacuation & Weatherproof Protection

Constructed with an IP45 ingress protection rating and sealed electronic compartments, the YD-R238FS resists moisture, dust, and outdoor weather. During power supply interruptions or emergency fire triggers, the central locks release automatically, enabling free barrier rotation for unhindered emergency evacuation.

Technical Specifications

Parameter	Specification
SKU	YD-R238FS (90° / 120° Options)
Product Category	Dual-Lane Full Height Turnstile Gate
Housing Material	SUS304 Stainless Steel
Barrier Arm Material	SUS304 Stainless Steel Tubing / Acrylic
Cabinet Dimensions	L2400 × W1500 × H2200 mm
Passage Corridor Width	530mm to 700mm per lane (Customizable)
Rotor Rotation Angle	90° (4-Arm Rotor) or 120° (3-Arm Rotor) Optional
Drive Core Type	Brushless Motor / Solenoid Valve Drive
MTBF	>10,000,000 Cycles
Throughput Rate	≤30 persons/minute/lane (Up to 60 total)
Traffic Control Direction	Single / Bi-Directional (Configurable)
Emergency Evacuation Mode	Free rotation on power failure
Communication Protocols	RS485 / Dry Contact Switch Signals
Control Logic Suite	Built-in Mainboard Controller Kit
Power Consumption	50W (Idle) / 100W (Peak)
Operating Voltage	AC 220V ± 10% (50Hz ± 10%)
Ingress Protection	IP45
Operating Temperature	-20°C to +70°C
Operating Humidity	≤90% (Non-condensing)
Deployment Environment	Indoor / Outdoor Weather-Exposed Perimeters

YD-R238FS 90° (Dimensions in mm)

Dimensional schematic drawing of 90 degree 4-arm dual lane full height turnstile showing cabinet length 2400mm width 1500mm height 2200mm and dual passage lane widths

YD-R238FS 120° (Dimensions in mm)

Dimensional schematic drawing of 120 degree 3-arm dual lane full height turnstile showing cabinet length 2400mm width 1500mm height 2200mm and dual passage lane widths

Target Applications & Installation Scenarios

Industrial Plants & Manufacturing Complexes

Deployed at high-traffic worker entrance points to manage heavy shift changes across dual parallel access lanes.

Transportation Terminals & Bus Depots

Configured along perimeter control boundaries to enforce orderly bidirectional passenger transit and eliminate fare evasion.

Correctional & High-Security Facilities

Installed as physical perimeter boundaries to prevent climbing, unauthorized breaches, and unmonitored tailgating.

Construction Sites & Energy Facilities

Combined with biometric card readers or site access software to log employee attendance in exposed outdoor environments.

Frequently Asked Questions

Q1: What is the difference between the 90° and 120° rotor options?

A: The 90° option uses a 4-arm rotor that divides the passage into four smaller quadrants, offering maximum anti-tailgating security. The 120° option uses a 3-arm rotor with three larger quadrants, providing wider spatial comfort for pedestrians carrying personal items.

Q2: How does a dual-lane full-height turnstile improve entry efficiency?

A: The YD-R238FS combines two independent passage lanes inside one 2400mm-wide cabinet frame. This allows simultaneous entrance and exit screening, doubling total throughput up to 60 persons per minute while using less installation space than two standalone units.

Q3: How does the system handle power loss during an emergency?

A: The turnstile features a fail-safe mechanical disengagement logic. Upon loss of electrical power or activation of a connected fire alarm system, internal locks disengage, allowing the rotor arms to turn freely for emergency evacuation.

Q4: Is the YD-R238FS suitable for outdoor perimeter installation?

A: Yes. The cabinet is constructed from SUS304 stainless steel with an IP45 ingress protection rating and operates reliably across temperature ranges from -20°C to +70°C, making it suitable for exposed outdoor perimeters.